HMC7992LP3DETR

features non-reflective

50 Ω design for high isolation: 45 dB typical at 2 GHz

Low insertion loss: 0.6 dB at 2 GHz

High Power Handling

33 dBm straight-through path

27 dBm Termination Path

High linearity 1 dB compression

(P1dB): 35 dBm typical third-order input

intercept (IIP3): 58 dBm Typical ESD Rating: 2 kV Human Body Model (HBM)

Class 2 Single Positive Power Supply: 3.3V to 5.0V

standard TTL, CMOS and 1.8V compatible control

16-Lead, 3mm × 3mm LFCSP Package (9 mm²)

Pin Compatible HMC241ALP3E

HMC7992 is a general purpose, non-reflective, 0.1 GHz to 6.0 GHz, silicon, single-pole, four-throw (SP4T) switch in a leadless, surface mount package. Ideal for cellular infrastructure applications, the switch provides high isolation of 45 dB at 2 GHz and low insertion loss of 0.6 dB at 2 GHz. It provides excellent power handling capabilities up to 6.0 GHz. Under 5v operation, the input power is 1 dB compression point (P1dB) and 35 dBm. The HMC7992 has good low-frequency input power handling below 0.1 GHz and can operate well below 10 kHz, with a typical 1 dB compression of 21 dBm (see Figure 21) and an IIP3 of 37 dBm at 1 MHz (see Figure 22).

on-chip circuit allows the HMC7992 to operate at a single positive supply voltage range of 3.3V to 5V and a single positive control voltage of 0V to 1.8V/3.3V/5.0V. The 2:4 decoder integrated in the switch requires only two controlled input signals with a positive control voltage range of 0V to 1.8V/3.3V/5.0V to select one of the four radio frequency (RF) paths.